The TINME TM-1100A+ is a centrifugal CNC oil mist collector with 2,000 m3/h nominal airflow at 50Hz. It is the highest nominal airflow option in the current TINME range.
Application position in the TINME range
This model can be reviewed for enclosed CNC machine-tool applications whose assessed conditions require the 2,000 m3/h option. A model should not be selected by machine name or airflow alone.
Confirm enclosure size, mist load, duct or inlet arrangement, available power and mounting support, together with coolant type, particulate, smoke or vapor, electrical supply and maintenance access. Final suitability requires application-specific confirmation.
Why choose the TM-1100A+ monitoring version?
The TM-1100A+ adds filter monitoring to the corresponding TM-1100A. Its listed airflow, motor, inlet, weight, dimensions, filtration structure and installation options remain the same as the A model. Monitoring is an added maintenance-information function; it does not replace inspection, safe isolation or application review.
Filtration and installation options
The listed configuration combines centrifugal separation with a multilayer filter. An optional HEPA post-filter can be considered for applications involving micromist, smoke or vapor. Machine-top mounting is listed, with optional floor or wall-bracket arrangements subject to installation review.
Technical Specifications
| Model | TM-1100A+ |
|---|---|
| Airflow at 50Hz | 2,000 m3/h |
| Motor power | 1.1 kW |
| Power supply | 3-phase 220V/380V, 50Hz/60Hz |
| Motor speed | 2,850 rpm |
| Inlet diameter | 150 mm |
| Weight | 52 kg |
| Dimensions (diameter x height) | 540 x 1,150 mm |
| Filter structure | Centrifugal separation, multilayer filter, optional HEPA post-filter |
| Filtration efficiency | Up to 99.97% at 0.3 micrometers with optional HEPA post-filter |
| Installation | Machine-top mounting; optional floor or wall-bracket mounting |
| Filter monitoring | Included filter monitoring function |
| Noise level | Needs Confirmation |
Specifications are based on the supplied 50Hz product table. Airflow increases at 60Hz; exact 60Hz airflow values require confirmation.
A+ Filter Monitoring Function
The A+ version adds a monitoring function to the corresponding A model. Its listed airflow, motor, inlet, weight, dimensions, filtration structure and installation options remain the same as the matching A version.
TM-1100A+ and TM-1100A Difference
The listed core specifications of these paired models are the same. The A+ version adds the filter monitoring function; the corresponding A version does not include it. Compare the monitoring requirement separately from airflow and machine suitability.
Filtration Process
- Polluted air is drawn from the machine enclosure into the lower pre-chamber.
- The rotating turbine generates centrifugal force, causing oil droplets to coalesce.
- A multilayer filter captures smaller remaining pollutant particles.
- Collected liquid returns through the drainage tube for reuse in the process where appropriate.
Maintenance
Internal filters can be accessed by opening the cover for cleaning or replacement. Maintenance intervals depend on the coolant, particulate load and operating cycle and require application confirmation.
Common Questions About the TM-1100A+
What is the listed airflow?
The listed nominal airflow at 50Hz is 2,000 m3/h. Exact 60Hz airflow requires confirmation.
Does this model include filter monitoring?
Yes. This A+ model includes the added filter monitoring function.
Is the optional HEPA post-filter included?
The HEPA post-filter is an option rather than a standard feature. Confirm the required filtration configuration for the machine, coolant and observed emissions.